LiFePO4

85W GaN LiFePO4 Battery Charger with single LED

Model                                 GaN65-
Input Voltage                     100-240Vac 50/60Hz     
Output                                DC14.4~57.6V 85W max                            
Charging Mode                  CC-CV-cutoff
Dimension                          114*69*29mm
Warranty                             1 year 
INQUIRY NOW
  • 12V 5.5A 4S GaN LiFePO4 battery charger
  • 24V 2.8A 8S GaN LiFePO4 battery charger
  • 48V 1.5A 16S GaN LiFePO4 battery charger
  • DESCRIPTION
  • TECHNICALS
  • DATASHEET DOWNLOAD

85W GaN LiFePO4 Charger

Input: AC 90~264V 50/60Hz
  • Output: DC14.4~57.6V 85W max
  • Multi-protections: OVP、OCP、Shorted and Reversed
  • Work mode: CC、CV （Two stages）
  • LED Indicator: Bi-color LED. Red/Green
  • Safety approval: CE FCC
  • Size&weight: 114 x 68.4 x 29mm/250g
  • Suit for: 12.8V~48V,4~16cells Li-Fe battery packs
  • Application: Power Tool,Electrical Bike,Mobile Lamp and so on

Model Rating Voltage Rating Current Industry
GaN085-144055 14.4V 5.5A Electrical Bike,Mobile Lamp
GaN085-288028 28.8V 2.8A Power Tools、Lighting Industry
GaN085-576015 57.6V 1.5A Electrical Bike,Mobile Lamp

MODEL

GaN085-144055

OUTPUT

Charge voltage  

14.4V±1%

Charge voltage range

10-14.4V

Charge current

5.5A±10%

Pre-charge current 

-

Charge-end current

≤0.55A ±20%

Rated power

79.2W

Recommended battery capacity  Note.3

5 - 40Ah

Leakage current from battery (Typ.)

≤2mA

CHARGE INDICATOR

LED indication

Red: Charging.   Green: Full or Idle

INPUT

Rated input voltage

100 - 240VAC  50 / 60Hz

Input voltage range      Note.4

90 - 264VAC

Power factor (Typ.)

PF>0. 55@AC100V, full load

Input current (Typ.)

1.3A@115VAC       0.8A@230VAC

Inrush current  (Typ.)

Cold start 75A @230VAC

Standby input power

<1W

Efficiency (Typ.)

93%

PROTECTION

Short circuit             

 Yes

Over voltage

Yes

Reverse polarity

Yes

Over temperature

-

ENVIRONMENT

Working temperature

-10 - +40℃ (Refer to " Derating Curve")

Working humidity

0 - 90% RH

Storage temperature,humidity

-40 - +70℃, 0 - 95% RH

Cooling

Natural   convection

Vibration resistance

10 - 50Hz, 2G 10min. 1cycle, 60min. each along X, Y, Z axes

SAFETY&EMC

(Note.6)

Max. temperature rise

< 40℃ on casing

Hi-Pot Insulation

i/p to o/p: 3000V (1 min)

Safety standards

IEC62368-1

EMC Emission

Parameter

Standard

Test Level I Note

Conducted

EN55032   FCC PART15

Class B

Radiated

EN55032   FCC PART15

Class B

Harmonic Current

EN61000-3-2

.....

Voltage Flicker

EN61000-3-3

.....

EMC IMMUNITY

EN61000-4-2，EN61000-4-3，EN61000-4-4，EN61000-4-5，EN61000-4-6，EN61000-4-8，EN61000-4-11

OTHERS

MTBF

30000H

Dimension

114*68.4*29mm(L*W*H)

Weight

250g

NOTE

  1. 1.Modification for charger specification may be required for different battery specification. Please contact us for details.
  2. 2.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  3. 3.This is suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation.
  4. 4.Derating  may be needed under low input voltages. Please check the derating curve for more details.
  5. 5.This protection mechanism  is  specified for the case the short circuit occurs after the charger is turned on.
  6. 6.The battery charger  is considered as an independent unit, but  the final equipment still need to re-confirm that the whole system complies with the EMC directives.
  7. 7.AC Inlet  is ICE320-C8, DC cord  is 1.5m 2*18AWG wires, DC terminal is defined when order.

File Name Size File Type Date Download

INFORMATION INQUIRY

  • Company

    Contact*

    E-Mail*

    Message*
     
     
     
     

    Verify code*

  • See? Click