36V 2A NiMh NiCd Battery Charger for 30cells 3-20Ah battery packs

30S Series

Part Number                       GCN100-36
Input Voltage                     100-240Vac 50/60Hz worldwide input
Output                                 48V 2A
Charging mode                   Microprocessor controlled
LED Color                           red--charging, green--charged/idle
Dimension                          171*71*40mm
Warranty                            1 year

INQUIRY NOW

DESCRIPTION
TECHNICALS
DATASHEET DOWNLOAD

30 cell Ni-Cd/Ni-MH Battery Charger with dT/dt end of charge Detection, Battery Pack Charger for R/C, Robots, bicycles

This a dT/dt fast battery charger with a microprocessor controlled charge and sense LED display and preset time-out. 100-240 VAC 60Hz / 50 Hz input, with fixed AC cord connector. Universal desk-top AC charger charges packs containing 30 cell, 36VDC NiMH or NiCad battery packs with peak charge detection. It can also charge packs containing 24 to 29 cells in series.

Input Voltage 100-240Vac 50/60Hz
Output                                       48V 2A
Suitable for 30S, 36V 3Ah-20Ah NiMh/NiCd battery pakcs
Charging mode Micro-processor controlled,
Cut-off conditions    dT/dt>=0.5 °C/min(TYP)
                                                  or -dV >= 7mV /CELL(TYP)
                                                  or Vmax>=1.6V/CELL
                                                  or Tmax>=50+-2°C
                                                 or Time out
Protection Short circuit, reverse polarity, overcharge

36V 30S 2A Smart NiMh Battery Pack Charger
NO	ITEM	UNIT	SPECIFICATION	REMARK
INPUT
01	RATING INPUT	V ac	100~240Vac 50/60Hz
02	INPUT RANGE	V ac	90~264Vac
03	RATING INPUT CURRENT	A	0.8Arms	INPUT:220V OUTPUT:Full load
04	MAX. INPUT POWER	W	95
OUTPUT
05	RATING OUTPUT VOLTAGE	V dc	48V
06	OUTPUT VOLTAGE RANGE	V dc	30VDC ~ 50VDC
07	SUIT WITH BATTERY	Ah	36V 3~20AH NI-MH
08	CHARGE CURRENT	A	1.8A ±0.2A
09	TRICKLE CURRENT	A	<0.1A
11	INNER TIMMER	hour	8hour	T.B.D. 1~10 hours.
12	MAX. OUTPUT POWER	W	85W
13	HOLD-ON TIME	ms	NC	Input: 220Vac Output: Full load
14	RIPPLE CURRENT	mA	<150	Input: 220Vac Output: Full load
15	MAIN CHARGE END CONDITION		dT/dt>=0.5 °C/min(TYP) or -ΔV >= 5mV /CELL(TYP) or Vmax>=1.6V/CELL or Tmax>=50+-2°C or Time out
16	LED INDICATION		RED: Main charge GREEN: Finish or idle GREEN LED FLASH: Errors	Error: Output short-circuit. Battery reversed, NTC errors……
17	Output Short-circuit Protection Output Reverse Protection	-	yes yes
18	EFFICIENCY	%	80%	At max. load
ENVIRONMENT
19	OPERATE TEMP.	°C	-10 ~ +40	Full load & natural convection.
20	OPERATE HUMIDITY	%RH	< +90	Relative humidity, non-condensing.
21	STORAGE TEMP.	°C	-40 ~ +70
22	STORAGE HUMIDITY	%RH	0 ~ +95	Relative humidity, non-condensing.
23	COOLING	-	Natural convection
24	TEMP. FACT	%	Less than 5%
25	VIBRATION		5MM/50HZ/600S	Non-operating condition.
26	IMPACT		1 meter drop test >= 3 times	Non-operating condition.
MECHANICAL
27	WEIGHT	g	650
28	SIZE	mm	1707151	Casing only
29	CONNECTER	-	DC PLUG: 3-PIN TPYE +, - , NTC AC PLUG: Defined when order	NTC type: temperature sensor resister 10K&B=3950
SAFETY
30	TEMP. RISE	°C	< 40 on casing	At any line and Max. Load
31	SAFETY STANDARD	-	EN60335 UL1310
32	EMC	-	EN55014 B
33	MTBF	hrs	30000
34	ESD	kV	8.0
35	HI-POT	V	i/p to o/p: 3000 (1 min.)	For final unit, cut-off current =10mA

File Name	Size	File Type	Date	Download
36V(30S) 2A NiMh/NiCd battery charger	111.978 KB	pdf	2015/7/21

30S Series

NO

ENVIRONMENT

INFORMATION INQUIRY

Products

Company

Service

Contact