1 cell-3.2V

3.65V 2A charger for 1 cell 3.2V LiFePO4 battery

Part Number:                       P2012-F1
Input:                                   100-240Vac 50/60Hz                                      
Charging mode:                   CC-CV, 2-stage
LED Color:                           red--charging, green--charged/idle                               
Dimension:                           83*43*30mm
Warranty:                             1 year  
INQUIRY NOW
  • 3.2V LiFePO4 battery charger
  • 1 cell LiFP batery charger
  • DESCRIPTION
  • TECHNICALS
  • DATASHEET DOWNLOAD
1 cell lithium iron phosphate and li-phos battery pack charger , single cell LiFePO4 pack charger, 3.65V lithium battery charger

This battery charger is a microprocessor controlled unit designed exclusively for charging 1 cell 3.2V Lithium iron phosphate battery packs. It has led indicators to indicate the current operating mode of the charger. This battery charger complies with applicable safety agency requirements, and it is listed with cTUVus and CE. This is an 3.6V peak battery charger.
1 cell 2000mA LiFePO4 battery charger
NO ITEM UNIT SPECIFICATION REMARK
INPUT
Rating Input Voltage V ac 100~240Vac 50/60Hz
Input voltage range V ac 90~264Vac
Rating Input Current A 0.2Arms Test Conditions: INPUT:220V OUTPUT:Full load
Max. input power W 16
OUTPUT
Rating output voltage V dc 3.65V
Output voltage range V dc 3VDC ~ 3.65VDC
Suitable for Battery type 3.2V Li iron phosphate cell or cells in parallel
Constant Charge current A 2 A (+0.15A)
Constant Voltage V 3.65V (+-0.1V)
Charge end current A <0.1
Typical charge time hour 1~1.5hours Test Conditions:
For 2 Ah Li iron phosphate pack
Max. output power W 13.2W
Hold-on time ms 20
Ripple current mA 50 Test Conditions:
Input: 220Vac Output: Full load
Charge finish condition V>7.3V + I<0.1A
LED color Red: charging Green: finish/idle
Output short-circuit protect Yes
Efficiency % >70% Test Conditions:
At max. load
Environment
Operate temperature ·C -10 ~ +40 Full load & natural convection.
Operate humidity %RH < +90 Relative humidity, non-condensing.
Storage temperature ·C -40 ~ +70
Storage humidity %RH 0 ~ +95 Relative humidity, non-condensing.
Cooling Natural convection
Temperature factor %
Vibration resistance 5MM/50HZ/600S Non-operating condition.
Impact resistance 1 meter drop test >= 3 times Non-operating condition.
Mechanical
Weight g 120 grams
Size mm 81x43x40 mm Case only
Connectors 5.5 x 2.1 mm barrel, others available on special order in quantity, adapter plugs available (see below)
Safety
Max. temperature rise ·C < 40 on casing At any line and Max. Load
Safety standards cUL, CE GB4943 UL1950 EN60950
EMC standard EN55022 B
MTBF hrs 30000
Limited power source VA 50
ESD kV 8
Hi-Pot Insulation V i/p to o/p: 3000 (1 min.) For final unit, cut-off current =10mA
File Name Size File Type Date Download
1 cell 2A LiFePO4 battery charger 23.606 KB pdf 2016/3/21

INFORMATION INQUIRY

  • Company

    Contact*

    E-Mail*

    Message*
     
     
     
     

    Verify code*

  • See? Click