a. The charger integrates power factor correction (PFC), it can avoid the impact of high current and can't produce pollution on the grid.
b. Efficiency>87%, Power Factor>0.97 for charger with 120V-240V input, or >0.7 for charger with 120V/230V input.
c. With MCU controller, CC+CV(H)+CV(L) 3-stages charge method.
Protection:
1. The charger's internal relay makes the output voltage is less than 5.5V with no-load, when the output is connected to a battery, the output voltage of charger is normal.
2. Short circuit protection: when the output of charger is shorted, the charger will close output automatically without any damage.
3. Reverse polarity protection: when the output is connected to a battery reversely, the charger will close output automatically without any damage.
4. Overheating protection: the internal temperature exceeds 80 ℃, the charger will close output automatically.
Input: 100-240Vac 50/60Hz or 120V/230Vac 50/60Hz
Output: 24V 7A
Charging mode: CC-CV-CV, 3 stage
Protection: Short, reverse, over-voltage, over-current
Safety Standard: Meet EN60335/EN61000
| File Name |
Size |
File Type |
Date |
Download |
| 200W 24V 7A lead acid charger |
491.942 KB |
pdf |
2016/3/3 |
 |
