12.6V-3S Series

12.6V 4.5A Lithium charger with charging percentage bar

Model:                                GC100-12L3
Input Voltage                      100-240Vac 50/60Hz    
Output                                12.6V 4.5A                                
Charging Mode                    Intelligent auto 4-stage, Pre-CC-CV-Cutoff
LED Color                           green LED cycling--charging, green LED full solid--charged
Demension                         170*71*51mm
INQUIRY NOW
  • 12.6V 4.5A li-ion battery charger
  • 10.8V lithium battery charger
  • 3S 4.5A lithium battery charger
  • DESCRIPTION
  • TECHNICALS
  • DATASHEET DOWNLOAD

12.6V 3-cell lithium-ion battery charger, 4.5A at 12.6 volts, with slow-start function and state-of-charge indicator

11.1 Volt 4.5A multi-stage li-ion and li-po recharger with universal AC input, includes a slow start feature and a 4-segment gas gauge.

The charger can be left permanently on the battery for maintenance.. It uses energy-saving techniques and advanced charge precision. The slow-start function helps battery cycle life, especially with deeply discharged batteries. The charger is fully isolated from the mains, has universal AC input, and a removable AC cord.  It will accurately lithium-ion and lithium-polymer packs.

Features:

It is programmed auto 4 stages (Ip-Im-Um-cutoff) charging process, designed for 4~25Ah Li-Ion/Polymer battery pack. Stage "Ip" is a pre-charge function for deep discharged battery pack, this is helpful for battery's cycle life. When the battery recovered by pre-charge small current, stage "Im" will give bulk current charging( up to 100W). Then, "Um" stage is followed, the output voltage is limited on C.V point, until the charge current declined to 0.4A. At this stage, the battery is charged completely and the charger will cut off output automatic.
What's more, it can display the charging process, indicate the battery capacity from 25% to 100% timely. This is helpful for user.
For more safety, it will enable protection mode when the battery polarity reversed or the output connectors shorted. 

Charge process:

Stage 1 slow start, precharge function for deeply discharged packs
Stage 2 bulk charge stage. 4.5 amps is applied to the battery until the voltage rises to 12.6 volts
Stage 3 constant voltage state until the charge current falls to 400mA
Stage 4 The charger turns off.

INPUT: AC 100~240V
OUTPUT: 12.6V 4.5A
Suit for: 10.8V 11.1V 3S Li-ion, LiPo
Charge Process: CC(pre-charge)-CC(bulk)-CV-cutoff
LED Indicator: With 25%~100% Battery Fuel Gauge
Protections: Short-circuit, Reverse Polarity
Safety Approval: CE cTUVus
Size: 171x 70 x 51mm
File Name Size File Type Date Download

INFORMATION INQUIRY

  • Company

    Contact*

    E-Mail*

    Message*
     
     
     
     

    Verify code*

  • See? Click