We supply Lead Acid, Lithium-ion, LiFePO4, NiMh NiCd battery chargers, battery tester, battery desulphator and power supply for every device and application.
| ITEM | UNIT | SPECIFICATION | REMARK | |||||
| INPUT | ||||||||
| 01 | Rating Input Voltage | V ac | 100~240Vac 50-60Hz | |||||
| 02 | Input voltage range | V ac | 90~264Vac | |||||
| 03 | Rating Input Current | A | 0.3Arms | 220Vac | ||||
| 04 | Max.input power | W | 52.5W | |||||
| OUTPUT | ||||||||
| 05 | Rating output voltage | V dc | 12.6V | |||||
| 06 | Output voltage range | V dc | 0VDC~12.6VDC | |||||
| 07 | Suit with Battery type | 11.1V Li-ion battery charger and capacity>3000mAh | ||||||
| 08 | Charging current(stage1) | A | 3.0±0.3 | |||||
| 09 | Charging voltage(stage2) | V | 12.4-12.65V | |||||
| 10 | Cut-off current(stage1→2) | A | 0.2-0.4A | |||||
| 11 | Typical charging time | hour | Fast charge 2hours Slow charge 5hours | |||||
| 12 | Max.output power | W | 42.0W | |||||
| 13 | Hold-on time | ms | NC | Input:220Vac Output:Full load | ||||
| 14 | Ripple current | mA | 150 | Input:220Vac Output:Full load | ||||
| 15 | Charge finish condition | I<0.40A | ||||||
| 16 | LED color | Green on:charging;Green flash:fully charged;Red on:power on; Yellow on:Battery temperature in high or low;Yellow on:Incorrect battery type or Battery NG | ||||||
| 17 | Output protect | - | OCP&OVP | |||||
| 18 | Efficiency | % | 80%(Typical) | At max.load | ||||
| Environment | ||||||||
| 19 | Operate temperature | ℃ | 0~+40 | Full load&natural convection | ||||
| 20 | Operate humidity | %RH | 20~90 | Relative humidity,non-condensing. | ||||
| 21 | Storage temperature | ℃ | -40~+70 | |||||
| 22 | Storage humidity | %RH | 10~95 | Relative humidity,non-condensing. | ||||
| 23 | Cooling | - | Natural convection | |||||
| 24 | Temperature factor | % | -- | |||||
| 25 | Vibration resistance | 5MM/50HZ/600S | Non-operating condition. | |||||
| 26 | Impact resistance | 1 meter drop test>=3 times | Non-operating condition. | |||||
| Mechanical | ||||||||
| 27 | Weight | g | ||||||
| 28 | Size | mm | Casing only | |||||
| 29 | Connectors | - | ||||||
| Safety | ||||||||
| 30 | Max.temperature rise | ℃ | <40 on casing | At any line and Max.Load | ||||
| 31 | Safety standards | - | ||||||
| 32 | EMC standard | - | ||||||
| 33 | MTBF | hrs | 40000 | |||||
| 34 | Limited power source | VA | - | |||||
| 35 | ESD | Kv | 8.0 | |||||
| 36 | Hi-Pot Insulation | v | Input to Output:3000Vac(1 min.) | For final nuit,cut-off current=10mA | ||||
| File Name | Size | File Type | Date | Download |
| 12.6V 3A Li-ion power tool charger | 65.512 KB | 2016/3/24 |  |
© 2022 GUDY ELECTRONICS
All Rights Reserved
